Name: Corded Transducerized Tightening Tools
Brand: NUCMO

Tool Specifications

Type	Model	Torque Range Nm	Max. Speed rpm	Output Drive	Start Method	Design Life
Straight	TCS-SA-050C-H14-00-1	0.05-0.5	4000	hex1/4	Trigger / Push	> 10 million cycles
	TCS-SA-120C-H14-00-1	0.24-1.2	4000	hex1/4
	TCS-SA-250C-H14-00-1	0.4-2.5	3000	hex1/4
	TCS-SA-008N-H14-00-1	1-8	2940	hex1/4	Trigger
	TCS-SA-012N-H14-00-1	2.4-12	950	hex1/4
	TCS-SA-025N-S38-00-1	4-22	1800	S3/8"
	TCS-SA-035N-S12-00-1	7-35	1200	S1/2"
	TCS-SA-065N-S12-00-1	10-65	560	S1/2"
Right-angle	TCA-SA-008N-H14-00-1	1.6-8	1750	hex1/4
	TCA-SA-012N-H14-00-1	2.4-12	1100	hex1/4
	TCA-SA-025N-S38-00-1	4-25	1750	S3/8"
	TCA-SA-035N-S38-00-1	7-35	1200	S1/2"
	TCA-SA-065N-S38-00-1	16-65	650	S1/2"
	TCA-SA-100N-S12-00-1	20-100	400	S1/2"
	TCA-SA-250N-S34-00-1	40-250	350	S3/4"
	TCA-SA-450N-S34-00-1	110-450	230	S3/4"
	TCA-SA-600N-S34-00-1	150-600	140	S3/4"

C01 Intelligent Controller

A next-generation tightening control hub that combines high-precision torque control with full-process data traceability, bringing simple, visualized production to modern factories;
Connect from a web browser to view and adjust parameters at any time, so every tightening is assured.

C01 controller: front view and rear panel interfaces (power switch, earth leakage protection, power port, cable connector, sync port, PLC IO port, E-stop, Ethernet, USB, SD card)

C01 controller dimensions: rear and side views with measurements in millimetres

Synchronized Tightening
Synchronizes up to 30 tightening spindles
Rework Strategy
Automatically reworks predicted failures, cutting NG counts and raising yield
Resume After Interruption
Resumes automatically after a network outage with external devices, so no data is lost
MES Integration
Connects to MES through multiple handshake methods (API, XML, HTTP, JSON, C#, etc.)
Monitored Error-proofing
Every tightening parameter can be monitored; step parameters, results, barcodes and tightening curves can all be collected and uploaded
Communication
Supports multiple protocols including Modbus, TCP, TCP/IP, fieldbus and I/O

High Speed
In-house compact coreless motor delivers higher speed and torque, up to 4,000 rpm for faster production
Built to Last
Accuracy holds for 500,000 tightenings 1,000,000 tightenings with no equipment failure Sold direct, with stable after-sales warranty
Flexible Cable
Cable runs in a drag chain Rated for more than 5,000,000 drag-chain cycles
Ergonomic Design
Ergonomic design Less effort, higher efficiency and more comfortable operation
Hot-swappable
Hot-swappable Fast changeover between production lines
Precision Control
Torque transducer: ±5% at 6σ, Cmk > 1.67 Angle sensor: 360° ±1

Dimensions: 130*300*300mm
Weight: 6kg
Voltage: 220v
Communication: Modbus TCP, TCP/IP (OP protocol or NUCMO proprietary protocol), fieldbus, I/O bus
Data Storage: Stores 1,000,000 tightening results and 1,000,000 tightening curves
Tightening Strategies: Torque, wait, angle, torque-or-angle, torque-and-angle, torque-to-angle, two-step, rundown, to-zero, synchronization node, tightening end, rework end
Number of Psets: 500Pset
Number of Jobs: 500Job